Factory-direct wholesale since 2016-09-06 · MOQ from 20 pcs · IGI & GRA certified

Wholesale Bridal Ring Sets

Bridal Ring Sets

Bridal ring sets and matching couples bands: how to specify a set that aligns, the fit tolerances that decide whether two rings actually sit together, and how to price a set as two pieces while selling it as one.

  • 12 products in this collection
  • MOQ from 20 pcs
  • Worldwide insured shipping
  • Certified stones on request

Showing 12 of 12 products

Wholesale pricing per piece. Add items to your quote list for tiered pricing.

What defines a set

A ring set is two or three rings designed to be worn together, typically an engagement ring with a matching band, or a pair of couples bands. The commercial appeal is obvious: it raises average order value and removes the customer hardest decision, which is matching two pieces themselves. The engineering challenge is equally obvious: the pieces must align, and alignment is a tolerance problem rather than a design opinion.

The tolerances that make or break a set

DimensionRequired alignmentWhy it fails
Band height at the contact pointWithin 0.3 mmA taller engagement band cuts into the wedding band
Shank curvature radiusMatched pairMismatched radius leaves a visible gap
Setting height above the fingerStated on the specification sheetA high setting prevents the band sitting flush
Ring sizeIdentical for both piecesSizing one piece independently breaks the alignment
Metal and platingSame batch where possibleDifferent batches produce a visible colour difference
Stone grade for pairsMatched to one gradeA visible tone shift between the two rings

These six parameters are why we produce set components in the same production run. Casting the engagement ring and the band weeks apart is the most common reason a set arrives slightly mismatched, and it is entirely avoidable.

Set configurations that sell

  • Solitaire plus plain band. The volume configuration. Lowest unit cost and highest sell-through.
  • Halo plus contoured band. The band curves around the halo. Higher labour, better margin, and the most photographed configuration.
  • Three-piece bridal set. Engagement ring plus two stackable bands, one on each side. Strong ticket size.
  • Couples matching bands. Same design in two widths, typically 4 mm and 6 mm, in the same metal. Sold as a pair and produced as two SKUs.
  • Eternity plus solitaire. Higher stone count on the band; sell the half-eternity version at the entry price point.

MOQ and pricing structure

A set is priced as its component pieces rather than as a single unit, so that a customer can buy either ring on its own. MOQ applies per component: 10 pieces per design for stock specifications, 30 pieces for a new silver design and 10 for a new gold design. Where the two components are produced in one run, we quote a combined tier price, normally 5% to 10% below the sum of the two standalone tiers, because the cast and plating batches are shared.

Quality checks specific to sets

  • Both pieces are measured for contact-point height and verified against each other, not just against the drawing.
  • Both pieces are sized on the same mandrel in the same session.
  • Plating is done in a single batch to guarantee colour match.
  • Stones are pulled as a matched group so tone is consistent between the engagement ring and the band.
  • The assembled set is photographed together. That image is what sells the set online, and it also reveals alignment problems before packing.

Continue browsing wholesale collections

Every collection below is stocked and priced for trade buyers — MOQ from 10 pcs, tiered pricing from 50 pcs, and OEM development on request.

All Products 467 designs · The full Holycome catalogue: 363 wholesale jewelry designs in moissanite, lab grown diamond and… Rings 273 designs · 245 ready rings designs for trade buyers — factory-direct pricing, MOQ from 10 pcs, IGI & GRA c… Women’s Rings 245 designs · 245 ready women’s rings designs for trade buyers — factory-direct pricing, MOQ from 10 pcs, IGI… Men’s Rings 18 designs · Men rings at wholesale: signets, plain and patterned bands, and stone-set designs built around… Earrings 33 designs · 23 ready earrings designs for trade buyers — factory-direct pricing, MOQ from 10 pcs, IGI & GRA… Bracelets 26 designs · 16 ready bracelets designs for trade buyers — factory-direct pricing, MOQ from 10 pcs, IGI & GR… Loose Moissanite Stones 10 designs · Loose moissanite at wholesale: calibrated melee and large singles, 9.25 Mohs, from 1.0 mm to 15… Loose Lab Grown Diamond Stones, Calibrated by Shape 14 designs · Loose lab grown diamonds at wholesale: CVD and HPHT, 0.01 ct to 5 ct and beyond, D to J colour… Moissanite Jewelry 294 designs · Moissanite jewelry manufactured in Wuzhou with D–F colour with VVS clarity as standard, GRA cer… Lab Grown Diamond Jewelry 67 designs · Lab Grown Diamond jewelry manufactured in Wuzhou with D–G colour with VS–VVS clarity as standar…

Questions about Bridal Ring Sets

Are set components sold separately or only as a pair?

They are listed and priced separately so a customer can buy either piece alone, and we also quote a combined tier price for the set. In practice most buyers list the engagement ring as the primary product and the band as an optional add-on, which performs better than a single bundled SKU because it keeps the entry price visible.

How do you ensure two rings sit flush together?

Both components are produced in the same run, measured against each other at the contact point with a 0.3 mm tolerance, sized on the same mandrel, and plated in one batch so the colour matches. We photograph the assembled set before packing as the final verification. This is why we ask for set orders as a single order rather than two separate ones.

What is the MOQ for a couples band pair?

MOQ applies per component and per width. For two widths in the same design, typically 4 mm and 6 mm, the standard MOQ is 10 pieces per width for stock specifications, so 20 pieces per order minimum. A new design from your reference starts at 30 pieces per width in silver and 10 per width in gold.

Can the wedding band be contoured to fit around a halo?

Yes, and it should be. A contoured band is produced from the engagement ring actual profile rather than an approximation, so send the engagement ring specification or a physical sample. Contouring adds a small labour cost and about 3 to 5 working days, and it is the difference between a set that looks designed and a set that looks assembled.

Get a factory quote in 12 hours

Send us your stone list or design files — we quote with real factory pricing.

Request a quote Chat on WhatsApp
Products Search Quote WhatsApp